FIAT Panda Classic User Manual

Page 93

CORRECT USE OF THE CAR

ARNING

LIGHTS AND MESSAGES

IN AN

EMERGENCY

CAR

MAINTENANCE

TECHNICAL

SPECIFICA

TIONS

IINDEX

DASHBOARD AND CONTROLS

SAFETY DEVICES

FITTING THE ISOFIX TYPE
SEAT

0 and 0+ group

For children of this weight group (babies
up to 13 kg), the child’s seat is facing back-
wards and the child restrained by the
child’s seat belts D-fig. 14.

As the child grows, passing to weight
group 1, remove the child’s seat from the
base and refit it facing forwards.

For proper mounting proceed as follows:
❒ check whether the release lever B is at

rest position (inward);

❒ find the presetting brackets A, then po-

sition the child restraint system with
the fastening devices C aligned with the
brackets;

❒ push the child restraint system until

hearing locking clicks;

❒ check proper locking by moving the

child’s seat with force: the built-in safe-
ty mechanism actually inhibits improp-
er coupling with only one coupling
locked.

fig. 14

F0GXXXXm

GROUP 1

For proper mounting proceed as follows:
❒ check whether the release lever B-

fig. 15 is at rest position (inward);

❒ find the presetting brackets A, then po-

sition the child restraint system with
the fastening devices C aligned with the
brackets;

fig. 15

F0G0052m

081-100 Panda New GB 21-06-2007 13:49 Pagina 92