FIAT Panda Classic User Manual

Page 84

CORRECT USE OF THE CAR

ARNING

LIGHTS AND MESSAGES

IN AN

EMERGENCY

CAR

MAINTENANCE

TECHNICAL

SPECIFICA

TIONS

INDEX

DASHBOARD AND CONTROLS

SAFETY DEVICES

For certain versions, the front seat belts
have just one fixed anchoring point C-
fig. 3 on the door post.

USING THE CENTRAL SEAT
BELT

Static lap belt with 2 anchor points
(for versions/markets where
applicable) fig. 4

To fasten the seat belt: fit the tongue A
into the buckle B until hearing the locking
click.

To unfasten the seat belt: press button C.

To adjust the belt: run the tape in the
buckle D, pulling the end E ) to tighten and
section F to loosen.

fig. 3

F0G0195m

fig. 4

F0G0224m

Make height adjustment
when the car is stationary.

WARNING

After adjustment, always
check that the slider is an-

chored in one of the positions pro-
vided. To do this, with the button A
released, exert a further pressure to
allow the anchor device to catch if re-
lease did not take place at one of the
preset positions.

WARNING

081-100 Panda New GB 21-06-2007 13:49 Pagina 83