FIAT Panda Classic - Manual (Page 140)

139
W
ARNING
LIGHTS AND MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICA
TIONS
INDEX
DASHBOARD AND CONTROLS
SAFETY DEVICES
CORRECT USE OF THE CAR
IN AN
EMERGENCY
To change the direction indicator bulb,
proceed as follows:
❒ release clip A-fig. 21 and remove cap
B;
❒ turn the bulb-holder D-fig. 22 and re-
move it (it is pressure-fitted);
IF AN EXTERIOR LIGHT
BURNS OUT
For the type of bulb and power rating, see
“When needing to change a bulb”.
fig. 21 F0G0089m fig. 22 F0G0090m
fig. 23 F0G0091m
FRONT LIGHT UNITS
To change the bulb, proceed as follows:
❒ release clip A-fig. 21 and remove cap
B;
❒ turn the bulb-holder C-fig. 22 and re-
move it (it is pressure-fitted);
❒ remove the burnt bulb E-fig. 23 and fit
the new bulb;
❒ refit by reversing the above mentioned
operations.
123-154 Panda New GB 21-06-2007 13:51 Pagina 139