beautypg.com

Isofix child restraint assembly setup – FIAT 500 User Manual

Page 80

background image

79

CORRECT USE OF THE

CAR

W

ARNING

LIGHTS AND MESSAGES

IN AN

EMERGENCY

CAR

MAINTENANCE

TECHNICAL

SPECIFICA

TIONS

INDEX

YOUR CAR

SAFETY DEVICES

❒ Only one child is to be strapped to each

retaining system.

❒ Always check the seat belts do not fit

around the child’s throat.

❒ While travelling, do not let the child sit

incorrectly or release the belts.

❒ Never carry children on your lap, even

newborns. No-one can hold a child in
the case of an accident.

❒ In case of an accident, replace the

child’s seat with a new one.

Do not arrange child seats on
the front seat in cars fitted

with passenger’s airbag. Children must
never travel on the front seat.

WARNING

The Lineaccessori Fiat includes the Uni-
versal Isofix “Duo Plus” child seat.

For any further installation/use detail, re-
fer to the “Instructions Manual” of the
child seat.

ISOFIX CHILD
RESTRAINT
ASSEMBLY SETUP

This car is preset for mounting the Uni-
versal Isofix child restraint system, a new
European standardised system for carry-
ing children safely.

It is possible to mount at the same time
both the traditional restraint system and
Isofix one. An example of child seat is
shown in fig. 9. The Universal Isofix child’s
seat covers weight group: 1. The other
weight groups are covered by the specif-
ic Isofix child seat, which can be used on-
ly if specifically designed, tested and ho-
mologated for this car (see car list pro-
vided with the child seat).

Due to its different anchoring system, the
child’s seat shall be anchored to the prop-
er lower metal rings A-fig. 10, set be-
tween rear seat back and cushion. After
removing the rear shelf, secure the up-
per belt (provided with the child’s seat) to
ring B-fig. 11 set between the rear back-
rest and the boot floor.

Remember that in case of Universal Isofix
child’s seat, you can only use all those
seats approved with the marking ECE
R44/03 “Universal Isofix”.

fig. 9

F0S0132m