FIAT 500 - Manual (Page 127)

126
W
ARNING
LIGHTS AND MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICA
TIONS
IINDEX
YOUR CAR
SAFETY DEVICES
CORRECT USE OF THE
CAR
IN AN
EMERGENCY
IF AN INTERIOR LIGHT
BURNS OUT
For the type of bulb and power rating, see
“When needing to change a bulb”.
INSIDE CEILING LIGHT
To change the bulb, proceed as follows:
❒ using the screwdriver provided, extract
the ceiling light A-fig. 32 working in the
point indicated by the arrow;
NUMBER PLATE LIGHTS fig. 31
To replace the bulbs proceed as follows:
❒ work in the point shown by the arrow
and remove lens A;
❒ change the bulb releasing it from the
side contacts and making sure the new
bulb is correctly fastened between the
contacts;
❒ reinstall the lens.
fig. 30 F0S0059m
THIRD BRAKE LIGHT fig. 29-30
To change the bulb proceed as follows:
❒ remove the two guard caps and un-
screw the two fastening screws A;
❒ withdraw the assembly;
❒ disconnect the electric connector B;
❒ press the retaining device C and open
the bulb holder;
❒ remove the snap-fitted bulb to be re-
placed and replace it;
❒ close back the cap locking it properly.
❒ screw in the two fastening screws and
reinstall the guard caps;
fig. 29 F0S0058m
fig. 31 F0S0139m