FIAT 500 - Manual (Page 155)

154
W
ARNING
LIGHTS AND MESSAGES
INDEX
YOUR CAR
SAFETY DEVICES
CORRECT USE OF THE
CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICA
TIONS
READING TYRE
MARKINGS fig. 4
Example: 175/65 R 14 82H
175 = Nominal width (S, distance in mm
between sidewalls).
65 = Height/width ratio (H/S) in per-
centage.
R = Radial tyre.
14 = Rim diameter in inches (Ø).
82 = Load rate (capacity).
H = Maximum speed rating.
WHEELS
RIMS AND TYRES
Pressed steel or alloy rims. Tubeless ra-
dial carcass tyres. All approved tyres are
listed in the Log Book.
IMPORTANT In the event of discrepan-
cies between the information provided on
this “Owner handbook” and the “Log
book”, consider the specifications shown
in the log book only.
Respect the prescribed size to ensure
safety of the car in movement. Fit tyres
of the same make and type on all wheels.
IMPORTANT Do not use inner tubes
with Tubeless tyres.
fig. 4 F0S0095m
SMALL SPARE WHEEL
Pressed steel rim Tubeless tyre.
WHEEL GEOMETRY
Toe-in measured between rims:
0,5 ± 1 mm
The values refer to the car in running or-
der.
147-165 FIAT 500 GBdx 19-05-2008 9:11 Pagina 154