FIAT 500 - Manual (Page 119)

118
W
ARNING
LIGHTS AND MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICA
TIONS
IINDEX
YOUR CAR
SAFETY DEVICES
CORRECT USE OF THE
CAR
IN AN
EMERGENCY
MAIN BEAM HEADLIGHTS
To change the bulb, proceed as follows:
❒ remove the protecting rubber cap men-
tioned above;
❒ release the two bulb holding clips A-
fig. 25;
❒ remove the bulb and replace it;
❒ fit the new bulb, making the outline of
the metallic part coincide with the
grooves on the reflector, then hook
back the bulb holding clips;
❒ reinstall the rubber cap;
DIPPED BEAM HEADLIGHTS
To change the bulb, proceed as follows:
❒ remove the protecting rubber cap men-
tioned above;
❒ press the fastener A-fig. 24 and extract
the bulb holder;
❒ remove the snap-fitted bulb and replace
it;
❒ refit the cap locking it properly.
❒ reinstall the rubber cap;
fig. 24 F0S0053m fig. 25 F0S0054m
Side
To change the bulb, proceed as follows:
❒ prise in the point indicated by the ar-
row, so as to compress the fixing clip
and extract the assembly B-fig. 23;
❒ turn the bulb holder counterclockwise,
remove the snap-fitted bulb and replace
it;
❒ reinstall the bulb holder into the lens,
then install the assembly B making sure
that the fixing clip has clicked.
fig. 23 F0S0138m
101-128 FIAT 500 GBdx 13-11-2007 13:56 Pagina 118