FIAT 500 User Manual

Page 114

113

ARNING

LIGHTS AND MESSAGES

CAR

MAINTENANCE

TECHNICAL

SPECIFICA

TIONS

INDEX

YOUR CAR

SAFETY DEVICES

CORRECT USE OF THE

CAR

IN AN

EMERGENCY

❒ if at least 1.8 bar pressure is read, re-

store proper pressure (with engine
running and handbrake on) and restart;

❒ drive with the utmost care to the near-

est Fiat Dealership.

Remember to inform the
workshop that the tyre has

been treated with a quick repair kit.
Give the instruction booklet to the
tyre repair workshop personnel.

WARNING

fig. 17

F0S0124m

fig. 18

F0S0125m

FOR CHECKING AND
RESTORING PRESSURE ONLY

The compressor may also be used for
restoring pressure only. Release the quick
coupling and connect directly to the tyre
valve fig. 17; in this way, the cylinder will
not be connected to the compressor and
no sealant will be injected.

CYLINDER REPLACEMENT
PROCEDURE

To replace the cylinder proceed as fol-
lows:
❒ disconnect connection A-fig. 18;
❒ turn counter-clockwise the cylinder to

replace and raise it;

❒ fit the new cylinder and turn it clock-

wise;

❒ connect connection A to the cylinder

and fit the transparent tube B into the
proper space.

101-128 FIAT 500 GBdx 13-11-2007 13:56 Pagina 113