FIAT Freemont - Manual (Page 256)

4. Firmly grasp the bulb by the two side latches and
squeeze them together to unlock the bulb from the
back of the lamp housing.
5. Pull the bulb straight out from the keyed opening in
the housing
6. Remove the bulb from the connector socket and
install the replacement bulb.
7. Align the index tabs of the replacement rear fog
lamp bulb/socket assembly with the slots in the
collar of the bulb opening on the back of the lamp
housing.
8. Insert bulb into the lamp housing until the index
tabs are engaged in the slots of the collar.
9. Firmly and evenly push the bulb straight into the
lamp housing until both side latches lock firmly into
place.
10. Reinstall the fog lamp housing.
SIDE REPEATER LAMP
The side repeater lamps are located in both front
fender panels.
1. Push the side repeater lens to left side to release the
spring tension and then pull it outward.
2. Disconnect the bulb from the harness connector
and then connect the replacement bulb. (fig. 166)
3. Engage the right hook of the side repeater lamp into
the sheet metal (note correct orientation of letter-
ing on lens).
(fig. 165)
Electrical Connector
(fig. 166)
Side Repeater Bulb Removal
250
KNOWING
YOUR
VEHICLE
SAFETY
STARTING
AND
DRIVING
WARNING
LIGHTS
AND
MESSAGES
IN AN
EMERGENCY
SERVICING
AND
CARE
TECHNICAL
SPECIFICATIONS
CONTENTS