FIAT Freemont - Manual (Page 255)

2. Remove the electrical connector from the fog lamp
housing. (fig. 163)
3. Firmly grasp the bulb by the two side latches and
squeeze them together to unlock the bulb from the
back of the front fog lamp housing.
4. Pull the bulb straight out from the keyed opening in
the housing.
5. Align the index tabs of the replacement front fog
lamp bulb with the slots in the collar of the bulb
opening on the back of the front fog lamp housing.
Do not touch the new bulb with your
fingers. Oil contamination will severely
shorten bulb life. If the bulb comes in
contact with an oily surface, clean the bulb with
rubbing alcohol.
6. Insert bulb into the lamp housing until the index
tabs are engaged in the slots of the collar.
7. Firmly and evenly push the bulb straight into the
lamp housing until both side latches lock firmly into
place.
REAR FOG LAMP
1. Reach behind the bumper above the bumper rein-
forcement and press the release tabs on the fog
lamp housing. (fig. 164)
2. Separate the fog lamp housing from the bumper
fascia.
3. Disconnect the electrical harness connector.
(fig. 165)
(fig. 163)
(fig. 164)
Release Tabs
249
KNOWING
YOUR
VEHICLE
SAFETY
STARTING
AND
DRIVING
WARNING
LIGHTS
AND
MESSAGES
IN AN
EMERGENCY
SERVICING
AND
CARE
TECHNICAL
SPECIFICATIONS
CONTENTS