Tanita KP-601 - Manual (Page 9)

7
PROGRAMMING BACKLIT BRIGHTNESS
Press CAL to display
.
When the power
is off
Press MODE to
confi rm.
While pressing
MODE press
ON/OFF.
3
4
2
1
0
When you have
made your selection,
press MODE to
confi rm.
The numeric values
are displayed.
Setting is fi nished. Press the TARE to
cycle through the
backlit options.
BATTERIES REPLACEMENT
When batteries are running low, is displayed. When batteries are running out, is
displayed and the power is automatically turned off.
Immediately replace with new batteries (all 4 batteries). Do not apply excessive force to the
measuring section when replacing batteries.
Default setting is “2”.
◆
1 2 3 4
5 6 7 8
TROUBLE SHOOTING
• The power doesn’t turn on.
Insert new 4 size AA (LR6) batteries. Be sure that the polarity of the batteries is set properly.
• or appears on the display.
The scale needs to be repaired. Please contact your retailer.
• appears on the display.
Place the test weight AFTER blinks.
If it doesn't work, the scale needs to be repaired. Please contact your retailer.
• appears on the display.
Place the gem cup BEFORE blinks and do not remove it until calibration is complete.
If it doesn't work, the scale needs to be repaired. Please contact your retailer.