beautypg.com

Special vcd & svcd features, Special cd & mp3 features, General features – Yamaha DVD-S530 User Manual

Page 18: Operation

background image

14

Operation

Subtitles

1

Select Z in the menu bar or press SUBTITLE
on the remote control directly.

2

Press SUBTITLE or 3/4 repeatedly to select the
different subtitles.

Special VCD & SVCD Features

Playback Control (PBC)

1

Load a Video CD with PBC and press PLAY.

2

Go through the menu with the buttons indicated
on the Video monitor until your chosen passage
starts to playback. If a PBC menu consists of a list
of tracks, you can select a track directly.

3

Enter your choice with the numeric buttons.

4

Press RETURN/RESUME to go back to the
previous menu, if applicable on the menu.

5

You may also select PBC off under Personal
Preferences.
➜ When set to off, PBC menus are not
activated for further playback.

Note:
When PBC is on, you cannot operate resume,
shuffle, repeat, A-B repeat, scan, time search and
FTS.

Special CD & MP3 Features

CD text and MP3 text

1

Some CD or MP3-CD discs may contain text
information (eg. track name, album name, artist
name etc.) which will appear on the front display
and video monitor during playback.

2

By default, CD text display is set to ON.

3

To switch off the CD text display, press CD
TEXT/BIT RATE during playback.

4

Press CD TEXT/BIT RATE again to switch on the
text display mode.

General Features

Note:
– Unless stated, all operations described are
based on remote control use. Some operations can
be carried out using the menu bar on the Video
monitor.

Moving to another title/chapter

DVD VCD

When a disc has more than one title/track or
chapter, you can move to another title/chapter as
follows:

1

Press ON SCREEN, then select W or X in the
menu bar.

2

Press 34 or numeric buttons to select a title/
chapter.

CD

1

Press T or S briefly during playback to go
to the next track or to return to the beginning
of the currect track respectively.

2

Press S twice briefly to step back to the
previous track.

3

To go directly to any track, enter the track
number using the numeric buttons.

Note:
– Long press of the
T or S will switch on
backward or forward search (see serch section).

Search

DVD VCD

1

Select

in the menu bar and press 4.

2

Use 1/2 to select the required speed: –32, –8 or
–4 (backward), or +4, +8, +32 (forward).

3

Select 1 or press PLAY to play the disc at normal
speed again.

● To exit the search mode, press 3.

(Playback continues at the selected speed.)

CD

● To search forward or backward through different

speeds, you can also hold down T or S
for more than two seconds.