Edimax Technology CV-7428nS - Manual (Page 14)

14
Your wireless bridge is now configured and ready for use with your wired
network device, such as smart TV, Blu-ray player or games console. Please see
Hardware Installation for guidance on using the wireless bridge with your
network device.
II-3. Hardware Installation
I. After WPS button setup
Connect the wireless bridge to one or more of your network devices, using
an Ethernet cable (included). Switch on your network device and connect
to your network as usual. See Figure i & Figure ii.
II. After iQ Setup
After you have completed iQ Setup, disconnect the wireless bridge from
your computer and power supply. Connect the wireless bridge to one or
more of your network devices, using an Ethernet cable (included) and
reconnect the power supply – remember to wait for the PWR LED to
display on to indicate that the device has finished booting up. Switch on
your network device and connect to your network as usual. See Figure i &
Figure ii.
Figure i