Edimax Technology IC-3015Wn - Manual (Page 83)

82
9.3.1.4 Motion­Triggered Recording
With this function activated, only motions captured by the camera will be
recorded, so you don’t have to waste hard disk storage space on images you
don’t need to pay attention to.
Here are the descriptions of all setting items:
Item
Description
Channel Select the channel number you wish to set.
Enable Enable motion record function.
Disable Disable motion record function.
Recording
Time Select the time duration that camera will
record when a motion has been detected
from dropdown menu in seconds.
Invoke alarm Send an alarm when a motion has been
WARNING: For applications that security is highly concerned, it’s not
recommended to use this function since some tiny changes you may
need to know may not be able to trigger the camera and the camera
will not start recording.