Edimax Technology IC-3015Wn - Manual (Page 24)

23
have to add a colon and port number after IP
camera’s IP address. For example, if the
camera’s IP address is 192.168.2.3 and HTTP
port number is 82, you have to input
‘http://192.168.2.3:82’ in web browser’s
address bar.
DHCP: IP camera will obtain IP address from
DHCP server on your local area network
automatically.
PPPoE: IP camera will connect to network by
PPPoE.
Please input PPPoE user name and password,
and input MTU value when required.
Please note: In some cases you can improve
network efficiency or correct connection
problem by setting a new MTU value, however,
In most cases you don’t have to change MTU
setting.
Click ‘Apply’ button to save changes you made.