Edimax Technology IC-3015Wn - Manual (Page 45)

44
of motion detection rectangle, and drag
the mouse.
Move motion detection area:
Put the mouse within the motion
detection area, and drag the mouse.
Sensitivity Change the sensitivity of motion detection.
Set to a higher value (right) and IP camera
will trigger the alarm when there’re only
small changes in video. If you found that IP
camera sends E‐mail or uploads picture to
FTP too frequently, and there’s nothing
happen in the snapshot video, you can set
to a lower value.
Threshold Set the motion detection threshold here
(input number 0 to 100). A higher value
represents IP camera will only trigger
alarm when the object in motion detection
area is really big.
Refresh Refresh the reference picture.
Save Save changes you made in this page.
5.1.2 FTP
You can upload a snapshot picture when motion detected by this IP camera.