Edimax Technology WP-S1000 - Manual (Page 43)

42
5.10 Firmware Upgrade
If there is new version of firmware (the system software of this projector server) available,
you can download it from Edimax’s website, and store the firmware file to your hard disk.
Then you can use this page to upload new firmware file to the projector server and replace
previous version.
1) Click ‘Browse’ button and you’ll be prompted to provide the location of the firmware
file.
2) Then click ‘Upgrade’ button to start firmware upgrade. Please note that all settings will
be restored to factory default setting after the firmware upgrade.
Please note: It’s recommended to use wired LAN/Ethernet connection to perform the
firmware upgrade, and never disconnect the network cable, or switch computer / projector
server off during the upgrade process.
After click on ‘Upgrade’ button,
the firmware upgrade process
takes 5-7 minutes.