Festool CTM 48 E-LE-AC CLEANTEX - Manual (Page 18)

18
CTM GB
Use only original Festool spare parts!
Order No. at:
www.festool.com/Service
Damaged safety devices and compo-
nents must be repaired or replaced in a
recognised specialist workshop, unless otherwise in-
dicated in the operating manual.
Observe the following instructions:
– The manufacturer or an instructed person must
perform a dust test at least once a year to deter-
mine whether the filter is damaged, the machine is
sealed properly and the monitoring features are
functioning correctly.
– Anything that cannot be cleaned must be discarded
in impermeable bags. Observe applicable disposal
regulations!
– For user servicing, the machine must be disman-
tled, cleaned and serviced, as far as is reasonably
practicable, without causing risk to the mainte-
nance staff and others. Suitable precautions in-
clude, decontamination before dismantling,
provision from local filtered exhaust ventilation
where the machine is dismantled, cleaning of the
maintenance area and suitable personal protec-
tion.
9.1 Changing the filter element
 Open the locking clips [2-2] and remove the top
section of the machine [2-1].
 Turn the top section of the machine so that the
main filter is facing upwards (Fig.[9]).
 Fold over the lever [9-3] and remove the retainer.
[9-2]
 Remove the used main filter and replace [9-1]
with a new one.
 Dispose of the used filter in accordance with stat-
utory regulations.
 Insert the retainer [9-2] and fold over the lever
[9-3] until it engages.
 Replace the top section [2-1] and close the lock-
ing clips [2-2].
9.2 Emptying the dust container
The dust container [2-3] can be emptied once the top
section has been removed.
 After extracting fluids, clean the fill level sensors
[10-1] regularly with a soft cloth and inspect for
damage.
10 Accessories
The order numbers for the accessories and filters
can be found in the Festool catalogue or on the Inter-
net at "www.festool.com".
10.1 Modules
The following modules for upgrading the mobile dust
extractor are available in the accessories pro-
gramme. Modules must be fitted to the module slot
[1-3] by an authorised service workshop:
– Compressed air module,
– Socket module with permanent power supply,
– Socket module with automatic switch-on unit (not
suitable for GB 110 V version),
– Energy box module (EAA) for using the automatic
switch-on unit on the EAA.
You can find more detailed information on the mod-
ules at "www.festool.com".
11 Environment
Do not dispose of the device in house-
hold waste!
Recycle devices, accesso-
ries and packaging. Observe applicable
country-specific regulations.
EU only: European Directive 2002/96/EC
stipulates that used electric power tools must be col-
lected separately and disposed of at an environmen-
tally responsible recycling centre.
Information on REACh:www.festool.com/reach
12 EU Declaration of Conformity
NOTE
Motor damage
 Never operate the extractor without a filter ele-
ment fitted as the motor may become damaged.
EKAT
1
2 3 5
4
Mobile dust extractor Serial no.
CTM 26 E 495865, 495866, 495870,
496948
CTM 26 E AC 496313, 496544, 496545,
496550, 497990, 497991,
497992
CTM 36 E 495867, 495868, 495871,
496949
CTM 36 E AC, CTM 36 E
AC-LHS 496546, 496547, 496548,
496551, 497069, 497073,
497072, 497076, 497070
CTM 36 E LE 495869, 496947, 496950
CTM 36 E LE AC 496549
CTM 48 E 498006, 498007
CTM 48 E LE 498008
CTM 48 E AC 498021, 498022