3M S10C - Manual (Page 24)

24
PICTURE - 1 Menu
With the PICTURE - 1 menu, the items shown in the Table below can be
performed.
Perform each operation in accordance with the instructions in the table below.
MENU
MAIN
PICTURE-1
PICTURE-2
INPUT
AUTO
SCREEN
OPTION GAMMA
COLOR BAL R
COLOR BAL G
COLOR BAL B
SHARPNESS
COLOR
TINT
MY MEMORY NORMAL
+0
+0
+0
+0
+0
+0
SAVE1
: SELECT
Item Description
GAMMA
Select a Gamma Mode:
NORMAL CINEMA DYNAMIC CUSTOM
• Selecting the COSTOM and then pressing the or the ENTER button calls
the CUSTOM menu.
CUSTOM Menu
Selecting one from the following and then pressing the
or the ENTER
button performs each function.
GAMMA COLOR TEMP R G B
• The R, G and B can be selected only when the USER is selected under the
COLOR TEMP.
COLOR BAL R Adjust the Red Color Balance: Strong Weak
COLOR BAL G Adjust the Green Color Balance: Strong Weak
COLOR BAL B Adjust the Blue Color Balance: Strong Weak
SHARPNESS
Adjust the Whole Sharpness: Clear Soft
• This is a function for video inputs. This item can’t be selected only at RGB
inputs.
COLOR
Adjust COLOR : Strong Weak
• This is a function for video inputs. This item can’t be selected only at RGB
inputs including SCART RGB inputs.
• It is unavailable to deepen colors on SECAM signal input. (The adjustment
bar position and value in menu box are changeable but no effect.)
TINT
Adjust the Tint: Green Red
• This is a function for video inputs. This item can’t be selected only at RGB
inputs including SCART RGB inputs.
Multifunctional Settings (continued)
GAMMA
Adjust the Gamma Data:
Up Down
COLOR TEMP
Select a Color Temperature Mode:
HIGH MIDDLE LOW USER
R
Adjust the Red Color Level for the USER mode of the
COLOR TEMP:
Strong Weak
G
Adjust the Green Color Level for the USER mode of the
COLOR TEMP:
Strong Weak
B
Adjust the Blue Color Level for the USER mode of the
COLOR TEMP:
Strong Weak
CUSTOM
CUSTOM
CUSTOM
CUSTOM
CUSTOM