3M S10C - Manual (Page 23)

23
MAIN Menu
With the MAIN menu, the items shown in the table below can be
performed.
Perform each operation in accordance with the instructions in the
table below.
MENU
MAIN
PICTURE-1
PICTURE-2
INPUT
AUTO
SCREEN
OPTION KEYSTONE
BRIGHT
CONTRAST
ASPECT
WHISPER
MIRROR
LANGUAGE
[Language] +0
+0
+0
4:3
NORMAL
NORMAL
ENGLISH
: SELECT
Item Description
KEYSTONE
Adjust the Keystone (Vertical) Distortion:
Upper in the data Lower in the data
• The adjustable range of this function will vary with the type of input signal. At
some signals, this function may not work well.
• When the V:INVERT or the H&V:INVERT is selected under the MIRROR item, if
the projector screen is inclined or if the projector is angled downward, this
function may not work correctly.
• When the WIDE is selected under the ASPECT item of the MAIN menu, this
adjustment is ignored.
• When the zoom adjustment is set to the TELE side, this correction may be
excessive. This function should be used with zoom set to WIDE whenever
possible.
BRIGHT Adjust Brightness: Light Dark
CONTRAST Adjust Contrast: Strong Weak
ASPECT
Select an Aspect Ratio
At a RGB input:
4:3 16:9 15:9 32:15
• At a RGB input, selecting an aspect ratio may display the message “SYNC IS
OUT OF RANGE”. In this case, please select one of other aspect ratios.
At a VIDEO input, a S-VIDEO input or a COMPONENT VIDEO input:
4:3 16:9 WIDE ZOOM
• At a COMPONENT VIDEO input of 16:9 Hi-Vision of 1125i(1035i/1080i)/750p,
only 16:9 can be selected.
• When the 4:3 is selected under the SCREEN TYPE item of the OPTION menu,
WIDE and ZOOM cannot be selected.
WHISPER
Select the Whisper Mode:
NORMAL WHISPER
• When the WHISPER is selected, acoustic noise and screen brightness are
reduced.
MIRROR
Select a Mirror Status:
NORMAL H:INVERT V:INVERT H&V:INVERT
LANGUAGE
Select a Menu Language:
ENGLISH
FRANÇAIS DEUTSCH ESPAÑOL
ITALIANO NORSK NEDERLANDS
PORTUGUÊS
SVENSKA SUOMI POLSKI
RESET
Reset the MAIN Menu Items:
Selecting the EXECUTE performs this function.
EXECUTE CANCEL
• The items of the MAIN menu are collectively returned to the initial setting.
Note that the items WHISPER and LANGUAGE are not reset.
Multifunctional Settings (continued)