3M MP8760 - Manual (Page 8)

 3M IPC 2000 3M  Multimedia Projector MP8760 3
ENGLISH
Section 3: Set Up/Connections
3-1. Terminal Connection Panel
The MP8760 projector has terminal connections on the backside of the projector. Refer to Section 3.4-Cable
Connections for more detail.
1. AUX: Only compatible with 3M devices.
2. SVHS/AUDIO IN: SVHS and audio input.
3. VIDEO1/AUDIO IN: Video1 and audio input.
4. VIDEO2/AUDIO IN: Video2 and audio input.
5. RS-232C: Mouse emulation/external projector control.
6. MONITOR: Output to external monitor.
7. PC/RGB1: Video input #1 from computer.
8. PC/RGB2: Video input #2 from computer.
9. AUDIO IN2: Audio L/R input from computer #2
10. AUDIO IN1: Audio L/R input from computer #1.
11. AUDIO OUT: Audio L/R output to external audio system.
3-2. Operator Touch Panel Keypad
The MP8760 operator touch panel keypad (Figure 3-2) is located on top of the projector. Refer to Section 4 for more
detail on using the keypad.
1. Zoom: Adjust (decrease/increase) image size.
2. Video: Select Video1, Video2 or S-VHS input
3. PC: Select PC/RGB 1/2 input.
4. Enter: Initiate drop windows, toggle check box
(on/off), display Info sub-menu or press and hold
then use Disc Pad to reposition menu location.
5. Volume (-/+): Adjust (increase/decrease) audio
level.
6. Mute: Toggle speakers on/off.
7. Brightness (-/+): Adjust image brightness. (See
Menu.)
8. Disc/Pad: Move cursor up/down, left/right.
9. Menu: Display/remove menus.
Menu (-/+): Increase/decrease menu value.
10. Aux: Toggle On/Off a 3M compatible device.
11. Focus: Adjust image focus.
12. Standby: Switch between standby mode (lamp
off, fan off after cool down) and projection mode
(lamp on, fan on).
Figure 3-2. Operator Panel Keypad
ENTER
FOCUS ZOOM
PC MENU
VIDEO AUX
+
+
—
—
1
2
3
11
10
9
8
7
6
12
4
5
AUX SVHS / AUDIO IN VIDEO 1 / AUDIO IN VIDEO 2 / AUDIO IN MONITOR
RS232
PC / RGB 2
PC / RGB 1
AUDIO IN AUDIO OUT
2 1 3 4 6 8 9 10
5 7
AUX SVHS / AUDIO IN VIDEO 1 / AUDIO IN VIDEO 2 / AUDIO IN MONITOR
RS232
PC / RGB 2
PC / RGB 1
AUDIO IN AUDIO OUT
O I
Figure 3-1. Input Connection Terminals