3M MP8760 - Manual (Page 16)

 3M IPC 2000 3M  Multimedia Projector MP8760 11
ENGLISH
4-5. Menu Adjustments/Settings, continued
In active PC/RGB mode:
Advanced Setup
(PC/RGB)
Submenu Items
Description / Action Default
Setting
Projection
(drop down window) Select projection orientation
(standard / Rear / Rear/Ceiling /
Ceiling) standard
Color Manager Display Color Manager submenu
Remote Control Remote control receiver -on / -off -on
RC Address Select remote control address
(1 / 2 / 3 / 4) 1
Sync Mode1
(drop down window) Select Sync Mode for PC/RGB1
(separate TTL / composite TTL /
separate ana. / composite ana. /
sync on green) separate TTL
Sync Mode2
(drop down window) Select Sync Mode for PC/RGB2
(separate TTL / composite TTL /
separate ana. / composite ana. /
sync on green) separate TTL
SOG Level Adjust level for sync on green
synchronization
Reset Data Modes Set all data modes to factory default
settings.
Reset lamp display Resets the lamp hours displayed on
the Info window
Test Display test submenu
In active Video mode:
Advanced Setup
(Video)
Submenu Items
Description / Action Default
Setting
Projection
(drop down window) Select projection orientation
(standard / Rear / Rear/Ceiling /
Ceiling) standard
Color Manager Display Color Manager submenu
Remote Control Remote control receiver -on / -off -on
RC Address Select remote control address
(1 / 2 / 3 / 4) 1
Video standard
(drop down window) Select Video standard
(PAL B,G,H,I / NTSC M / SECAM /
NTSC 44 / PAL M / PAL N / PAL 60 /
NTSC COMB / automatic) automatic
Reset lamp display Resets the lamp hours displayed on
the info window
Test Display test submenu
Advanced Setup
Projection standard
Color Manager
Remote Control
RC Address 1
Video standard automatic
Reset lamp display
Test
Advanced Setup
Projection standard
Color Manager
Remote Control
RC Address 1
Sync Mode1
separate TTL
Sync Mode2 separate TTL
SOG level
Reset Data Modes
Reset lamp display
Test