Wireless connection – 2Wire HOME PORTAL 100S User Manual

Page 24

Text mode
Original mode

Note:

If you use a 2Wire wireless adapter for wireless networking, the HomePortal Setup Wizard software

automatically configures it to communicate with the HomePortal during setup, but you will need to install
the driver. See Appendix A for detailed installation instructions.

If you are NOT using a 2Wire wireless adapter, you will need to manually configure your adapter of choice
to communicate with the HomePortal BEFORE installing the HomePortal software. See Appendix B for
detailed configuration instructions.

Install your wireless adapter according to the manufacturer’s instructions (see note above).

After your adapter is successfully installed, repeat Step 3 “Install the HomePortal
Software” on page 15.

Wireless Connection

Model 100SW only

Requires a computer with 802.11b wireless adapter installed

This manual is related to the following products:

HOME PORTAL 100SW