3M X50C - Manual (Page 25)

MAIN Menu
Item Description
BRIGHT Adjust Brightness: Light Dark
CONTRAST Adjust Contrast: Strong Weak
ASPECT
Select Aspect Ratio:
At rgb Input or Hi-Vision 1125i(1035i/1080i)/750p of component video
Input:
4:3
16:9
At video Input, s-video Input or 525i/525p/625i of component video Input:
4:3
16:9 SMALL
• The SMALL picture may not be displayed correctly with certain input signals.
PICT.POSIT.
Select Picture Position (for 16:9/SMALL Picture):
TOP
CENTER BOTTOM
GAMMA
Select Gamma Mode:
NORMAL
CINEMA DYNAMIC
MIRROR
Select Mirror Status:
NORMAL
H:INVERT V:INVERT H&V:INVERT
LANGUAGE
Select Menu Language:
ENGLISH
FRANÇAIS DEUTSCH ESPAÑOL
ITALIANO NORSK NEDERLANDS
POTUGUÊS
MULTIFUNCTIONAL SETTINGS
This device has 6 separate menus: MAIN, PICTURE 1, PICTURE 2, INPUT,
SCREEN, OPTION. Each of these menus is operated using the same methods.
The basic operations of these menus are as follows.
With the MAIN menu, the seven items shown in the Table below can be
performed.
Perform each operation in accordance with the instructions in the Table.
Menu screen display : Press the MENU button.
Menu selection
: Choose a menu name using the button, and press the
button or the ENTER button.
Item selection : Choose an item using the button, and press the
button or the ENTER button.
Return menu to last previous screen: Press the button or the ESC button.
Execution of settings and/or adjustments: Operate by using the button. (For further
details, read the explanation for each separate menu.)
Initialization of settings and/or adjustments: During operation, press the RESET button.
(Note that items whose functions are
performed simultaneously with the operation
of clock phase, language selection, automatic
adjustment, etc., cannot be initialized.)
End menu operations: Press the MENU button, or do not perform any operation for
several seconds.
MAIN Menu
24
Example : MAIN Menu
(BRIGHT)
MENU
: SELECT
MAIN
PICTURE-1
PICTURE-2
INPUT
SCREEN
OPTION BRIGHT
CONTRAST
ASPECT
PICT. POSIT.
GAMMA
MIRROR
LANGUAGE
12