Xerox FaxCentre F110 - Manual (Page 2)

II
New Print Cartridge
1 Open the cover by taking hold of both document guides
and tipping the cover backward.
2 Take the new print cartridge from the package.
3 Remove the black protective paper and other packaging ma-
terial, but do not yet remove the protective strip from the
cartridge.
4 Shake the new print cartridge back and forth several times
in order to distribute the toner evenly, thereby improving
the print quality.
5 Only after removing the other packaging, completely
pull off the protection strip located on the left side of the
cartridge
Æ
Once you have removed the protection strip, do not
shake the print cartridge any more. Otherwise, it is
possible that toner dust will be released into the air.
6 Place the print cartridge into your machine. Th e cartridge
should snap securely into position.
7 Close the cover. Make sure that the cover snaps securely
into position on both sides.
¡
Th e toner level memory for this starter cartridge
was set at the factory. Th e starter cartridge need
not be updated with a Plug’n’Print card. For each ad-
ditional print cartridge that you insert into your ma-
chine, you must update the toner level memory with the
Plug’n’Print card provided.