Yamaha RX-V596RDS - Manual (Page 29)

27
English
B
ASIC OPERA
TION
AD
V
ANCED OPERA
TION
APPENDIX
INTR
ODUCTION
PREP
ARA
TION
5 Press PRESET/TUNING h once to tune in to a
higher frequency or l once to tune in to a
lower frequency.
Press the button again if the tuning search does not stop
at the desired station.
y
• Use the manual tuning method if the tuning search does not stop
at the desired station (because the signal from the station is weak).
• When tuned in to a station, the frequency of the received station is
shown on the display. If an RDS station that offers the PS data
service is being received, the station name is shown instead of the
frequency on the display.
Manual Tuning
1 Use INPUT SELECTOR to
select the tuner as the
input source.
2 Press FM/AM to select the reception band (FM
or AM).
“FM” or “AM” appears on the display.
3 Press TUNING MODE so that the “AUTO”
indicator goes off.
4 Press PRESET/TUNING (EDIT) to turn “ z ” off.
5 Press PRESET/TUNING h or l to tune in to
the desired station.
To continue the tuning search, hold down the button.
Note
• If you tune in manually to an FM station, it will be automatically
received in monaural mode to increase the signal quality.
TUNING
L R – + – +
3 2
1
4 5
Automatic tuning is effective when station signals are
strong and there is no interference. However, if the signal
from the station you want to select is weak, you must tune
in to it manually (manual tuning).
Automatic Tuning
1 Use INPUT SELECTOR to
select the tuner as the
input source.
2 Press FM/AM to select the reception band (FM
or AM).
“FM” or “AM” appears on the display.
3 Press TUNING MODE so that the “AUTO”
indicator lights up on the display.
4 Press PRESET/TUNING (EDIT) to turn “ z ” off.
Lights up
Goes off
Turn “ z ” off
Turn “ z ” off
or
or
0105V596RDS27-30_EN 2/29/0, 3:29 PM 27