ZyXEL Communications P-870H-51a v2 - Manual (Page 11)

ENGLISH
11
Wall-mounting
Take the following steps to hang your P-870H/HW-51a v2 on a wall.
1. Select a position free of obstructions on a sturdy wall.
2. Drill two holes for the screws, exactly 120 mm apart.
3. Be careful to avoid damaging pipes or cables located inside the wall
when drilling holes for the screws.
4. Do not insert the screws all the way into the wall. Leave a small gap of
about 0.5 cm between the heads of the screws and the wall.
5. Make sure the screws are snugly fastened to the wall. They need to
hold the weight of the P-870H/HW-51a v2 with the connection cables.
6. Align the holes on the back of the P-870H/HW-51a v2 with the screws
on the wall. Hang the P-870H/HW-51a v2 on the screws.