Yamaha DSP-AZ1 - Manual (Page 84)

E-
82
SLEEP TIMER
Use this feature to automatically set this unit in the standby mode after the amount of time you have set. The sleep timer is useful when you
are going to sleep while this unit is playing or recording a source. The sleep timer also automatically turns off the external components
connected to AC OUTLET(S).
PUSH
ON SCREEN
SLEEP
LEVEL
TEST
SET MENU
PARAMETER
2
■ Setting the sleep timer
1 1 Select a source and start playback on the source
component.
2 2 Press SLEEP repeatedly to set the amount of time.
Each time you press SLEEP, the front panel display changes as
shown below.
The “SLEEP” indicator soon lights up on the front panel display
after the sleep timer has been set. The display then returns to the
previous indication.
SLEEP
SLEEP 120min.
SLEEP 90min.
SLEEP 60min.
SLEEP 30min.
SLEEP OFF
SLEEP indicator
D–TV/LD DVD
CABLE MD/TAPE
SAT CD–R
VCR 1 TUNER
VCR 2 CD
VCR3/DVR PHONO
V–AUX SLEEP
DSP
SLEEP 120min. VOLUME
LFE
L C R
RL
SP
A
RC RR
■ Canceling the sleep timer
Press SLEEP repeatedly until “SLEEP OFF” appears on the front
panel display.
After a few seconds, “SLEEP OFF” disappears, the “SLEEP”
indicator goes off and the display returns to the previous indication.
Note
• The sleep timer setting can also be canceled by setting this unit in
the standby mode by using STANDBY on the remote control (or
STANDBY/ON on the front panel) or by disconnecting the AC
power cord from the AC outlet.