Yamaha DSP-AZ1 - Manual (Page 50)

E-
48
BASIC PLAYBACK
■ Playing the Dolby Digital EX or DTS ES
software
Press EX/ES to turn on the Dolby Digital EX or DTS ES decoder to
listen to the Dolby Digital EX and DTS ES software with a rear
center speaker.
The display changes AUTO ^ Discrete 6.1 ^ Matrix 6.1 ^ OFF
each time the EX/ES is pressed.
AUTO: This mode automatically switches Dolby Digital EX/DTS
ES Matrix 6.1/DTS ES Discrete 6.1 depending on the signal in the
input source that this unit can detect. Rear center speaker does not
work for 5.1 channel sources.
Discrete 6.1: This mode can be selected when the source with
DTS ES Discrete format has been detected. (The “DISCRETE”
indicator lights up.)
Matrix 6.1: This mode makes 6-channel playback of the input
source with Matrix or Matrix compatible format through the Matrix
6.1 decoder. (The “MATRIX” indicator lights up.)
OFF: Rear center speaker does not work in this mode.
Cautions
• Some 6.1-channel compatible discs do not have the signal (flag)
which this unit can automatically detect. When playing this kind
of discs with 6.1 channel, select “Matrix 6.1”.
• 6.1-channel playback is not possible even if EX/ES is pressed in
the following cases:
1 when “1C REAR L/R SP” is set to “NONE”
2 when the sound effect is turned off
3 when the source connected to the 6CH INPUT jack is being
played
4 when Dolby Digital KARAOKE source is being played
CHP/INDEX
EX/ES
D–TV/LD DVD
CABLE MD/TAPE
SAT CD–R
VCR 1 TUNER
VCR 2 CD
VCR3/DVR PHONO
V–AUX
DISCRETE
DSP
EX/ES
AUTO:Disc 6.1
VOLUME
LFE
L C R
RL
SP
A
RC RR
MATRIX
MATRIX/DISCRETE indicator
■ Selecting PRO LOGIC, PRO LOGIC or Neo: 6
You can enjoy the 2-channel sources decoded into five or six
discrete channels by selecting PRO LOGIC, PRO LOGIC or Neo:
6 in the program No. 12.
1 1 Select a 2-channel source and start playback on the
source component.
2 2 Press the numeric button 12 repeatedly to select the
decoder; PRO LOGIC, PRO LOGIC or Neo: 6.
The decoder selection switches among PRO LOGIC, PRO
LOGIC and Neo: 6 on the front panel display.
Cautions
• Playback using DOLBY PRO LOGIC and DTS Neo: 6 decoders
is possible only for 2-channel signals.
• PROGRAM q/w on the front panel can be also used to select
these programs.
DOLBY PRO LOGIC decoder
+ 100
12
/DTS
SUR.
PRO LOGIC
Normal
PRO LOGIC
Enhanced
PRO LOGIC
Movie
PRO LOGIC
Music
Neo:6
Cinema
Neo:6
Music
DOLBY PRO LOGIC
decoder
DTS Neo: 6 decoder