Functional performance criteria – Xerox 7242 User Manual
Page 6
www.xerox.com/Section508
6 of 8
Last Revision: 10/03/07
Criteria
Supporting Features
Remarks and explanations
which are freestanding,
non-portable, and
intended to be used in one
location and which have
operable controls.
(j)(2) Products which are
freestanding, non-
portable, and intended to
be used in one location
and which have operable
controls shall comply with
the following: Where any
operable control is 10
inches or less behind the
reference plane, the
height shall be 54 inches
maximum and 15 inches
minimum above the floor.
Supports
All operable controls are within specification. The
document handler supports the rule as long as the
operator does not open to its fullest extent.
(j)(3) Products which are
freestanding, non-
portable, and intended to
be used in one location
and which have operable
controls shall comply with
the following: Where any
operable control is more
than 10 inches and not
more than 24 inches
behind the reference
plane, the height shall be
46 inches maximum and
15 inches minimum above
the floor.
Supports
All operable controls are within specification. The
document handler supports the rule as long as the
operator does not open to its fullest extent.
(j)(4) Products which are
freestanding, non-
portable, and intended to
be used in one location
and which have operable
controls shall comply with
the following: Operable
controls shall not be more
than 24 inches behind the
reference plane.
Supports
All operable controls are within specification. The
document handler supports the rule as long as the
operator does not open to its fullest extent.
Section 1194.31 Functional Performance Criteria – Detail
Criteria
Supporting Features
Remarks and explanations
(a) At least one mode of
operation and information
retrieval that does not
require user vision shall
be provided, or support for
Assistive Technology
used by people who are
blind or visually impaired
Some limitations exist
There is no alternative to the product touch screen.