Yamaha EF3000iSE User Manual

Page 25

– 20 –

761-081a

762-042

12v

762-043a

763-238a

AE00825

Battery Charging

NOTE:

The generator DC rated voltage is 12V.

1. Wind the battery charging lead (furnished as an

accessory) 2 or 3 turns around the handle and plug
into DC receptacle.

NOTE:

9 Make connections to the battery after starting the

engine.

9 Clamp the red wire to the positive (+) terminal and

the black wire to the negative (-) terminal of the
battery. Do not reverse these positions.

1 Red
2 Black

2. Start the engine.
3. Press in the DC protector and install the battery.

9 Be sure the battery leads are properly connect-

ed.

9 Be sure the breather hose is properly connect-

ed and is not damaged or obstructed.

9 Reduce the load to the specified generator

rated output if the DC protector turns off. If it
turns off again, consult a Yamaha dealer.

NOTE:

Press to reset the DC protector.

1 “ON”
2 “OFF”

NOTE:

9 At full charge, electrolyte specific gravity is

between 1.26 and 1.28.

9 Check specific gravity hourly.

7CH-9-10-a 5/18/04 2:22 PM Page 20

This manual is related to the following products: