Yamaha RX-V670 - Manual (Page 23)

23
For Control of This Unit
REMOTE CONTROL TRANSMITTER
The provided remote control transmitter is designed to control this unit and other YAMAHA components. If the CD player, turntable,
LD player and tape deck connected to this unit are YAMAHA components, then this remote control transmitter will also control
various functions of each component.
Moreover, this remote control transmitter can learn various functions from other remote control transmitters without losing the preset
key functions. If you use this “learning” function, you will no more need so many remote control transmitters to control various
components to be used. For details, refer to page 25.
KEY FUNCTIONS
When you operate this unit and/or other YAMAHA components with this remote control transmitter, set the YPC-USER-LEARN
switch to the YPC (Yamaha Preset Code) position.
Refer to “YPC-USER-LEARN switch”
on page 25.
Turns the power on/off.
Selects preset station number.
* +: Selects higher preset station
number.
–: Selects lower preset station
number.
A/B/C/D/E: Selects the page (A – E) of
preset station buttons.
Used for speaker balance
adjustment.
Adjusts sound output level at
each speaker.
Refer to “RESET button” on page 25.
Refer to page 26.
Adjusts delay time.
Set the SLEEP time.
Refer to “Blank keys” on
page 25.
Selects input source.
Selects a program from
the digital sound field
Switches on/off digital sound field processor.
Turns the master volume level
up/down.
When pressed, mutes the volume level.
To resume original volume level, press
this again.
While muting, the indicator on the
VOLUME control flashes continuously.