Zanussi ZCG 611 - Manual (Page 6)

6
24 Hour Clock
Setting the time of day
When the power supply is first switched on, or after a
power failure, 0.00 and AUTO will flash alternatively in the
display.
To set the correct time of day:
1. Press button “ ” and “ ” together (See Fig. 1).
2. Release buttons, then press button “ ”: 12.00 will
show in the display (See Fig. 2).
3. Within 5 seconds press and hold either button “ ”
to increase or button “ ” to decrease the time until
the correct time of day on the 24 hour clock is reached.
To reset the correct time of day:
1. Press button “ ” and “ ” together. Then press and
hold either button “ ” to increase or button “ ” to
decrease the time until the correct time of day on the
24 hour clock is reached.
NOTE: The increase and decrease control buttons
operate slowly at first and then more rapidly. They
should be pressed separately.
Things to note
1. The time of day must be set before the oven will ope-
rate. There will be a few seconds delay before the
oven switches on.
STOP
SET
TIME
PUSH
BOTH
1 2
A
U
T
O
Fig. 1
Fig. 2
STOP
SET
TIME
PUSH
BOTH
A
U
T
O
STOP
SET
TIME
PUSH
BOTH
1. DECREASE CONTROL ( )
2. INCREASE CONTROL ( )
MINUTE MINDER SYMBOL ( )
PUSH BOTH CLOCK SETTING SYMBOL ( )
CHILD SAFETY SYMBOL ( )