Zebra Technologies P310i - Manual (Page 28)

P310 i Plastic Card printer
Card
Printer
Solutions
General information
Getting started
Operation
Cleaning
Specifications
Appendix A
Appendix B
Troubleshooting
Printing a card
Appendix C
21
3. Remove Cleaning Roller from Cartridge and
discard.
4. Install new Cleaning Roller into Cartridge*.
To avoid contamination, always hold the
Cleaning Roller assembly by the ends.
5. Carefully peel off wrapper from new
Cleaning Roller while in Cartridge.
6. To replace Cartridge into printer:
Make sure the arrow on top of the assembly is
facing toward the rear of the printer.
Hook assembly into slot on printer and rotate
down. Ensure the assembly locks in place.
DO NOT touch the roller surface that contacts
the card.
7. Close Cover.
* See Appendix C for replacement Cleaning Rollers.
SLOT
Although the amber and red inducators will keep
flashing until maintenance has been performed,
the printer will continue to operate.