Xerox KS-801 - Manual (Page 30)

-30-
6.3 View Port Status
Select [3] from main menu to view all LAN port status. The port status are
shown like following table style:
---------------------------------------------
Port LinkStatus PortControl Speed Duplex FlowControl
[1] [Unlink] [Disable] [100] [Full] [Enable]
[2] [Link ] [Enable ] [10 ] [Half] [Enable]
[3] [Unlink] [Disable] [100] [Full] [Enable]
[4] [Unlink] [Disable] [100] [Full] [Enable]
[5] [Unlink] [Disable] [100] [Full] [Enable]
[6] [Unlink] [Disable] [100] [Full] [Enable]
[7] [Unlink] [Disable] [100] [Full] [Enable]
[8] [Unlink] [Disable] [100] [Full] [Enable]
[9] [Unlink] [Disable] [100] [Full] [Enable]
---------------------------------------------
The port status definitions are:
Port Status States Interpretation
LinkStatus Unlink No active link
Link Active link established
PortControl Disable Port function is disabled.
Enable Port function is enabled.
Speed 100 100Mbps.
10 10Mbps.
Duplex Full Full duplex mode.
Half Half duplex mode.
FlowControl Enable Flow control function is enabled.
Disable Flow control function is disabled.