Performing network management, 1 management support, Led indicators – Xerox KS-801 User Manual
Page 22: 1 led panels 4.2 interpretation, 1 led panels, 2 interpretation
-22-
4. LED Indicators
4.1 LED Panels
The switch provides comprehensive LED indicators for diagnosing and
monitoring the operation of the unit as illustrated below:
4.2 Interpretation
Power LED : indicates the status of the power supplied to the switch.
Link/Act. LED : indicates the port cable link and traffic activity.
10/100M LED : indicates the connection speed used
Duplex/Col. LED : indicate the duplex mode used and collision status
FX LED : indicate the fiber module is installed and active.
The LED indicators labeled a port number on top are corresponding to a
specific 10/100BASE-TX port. The states and indications are:
LED
STATE
INDICATION
Power
Off
Power Off
Power
On
Power On
Link/Act.
On
Link active
Link/Act.
Off
No active link
Link/Act.
Blink
Tx or Rx activities.
10/100M
On
100Mbps speed
10/100M
Off
10Mbps speed
Duplex/Col.
On
Full duplex mode
Duplex/Col.
Off
Half duplex mode
Duplex/Col.
Blink
Collision occurrences
FX
On
One fiber module is on.