beautypg.com

Set >cancel, Check:testtone check ok? ..yes – Yamaha HTR-6130 User Manual

Page 27

background image

23

En

Basic setup

PREP

ARA

TION

English

7

Press 7n to select “SET” and then 7l / h
to select the desired setting.

SET >CANCEL

Choices: SET, CANCEL
• Select “SET” to apply the settings you made.
• Select “CANCEL” to cancel the setup procedure

without making any changes.

y

You can also press HMENU to cancel the setup procedure.

8

Press 7

ENTER to confirm your selection.

If you selected “SET” in step 7, each speaker outputs
a test tone twice in turn. “CHECK:TestTone” appears
in the front panel display for a few seconds and then
“CHECK OK?” appears in the front panel display.

y

• Check the speaker connections (see page 5) and adjust the

“SPEAKERS” settings back in step 6, if necessary.

• The indicator of the speaker currently outputting the test

tone flashes in the front panel display.

9

Press 7l / h to select the desired setting.

Choices: YES, NO
• Select “YES” to complete the setup procedure if

the test tone levels from each speaker were
satisfactory.

• Select “NO” to proceed to the speaker level

adjustment menu to balance the output level of
each speaker.

10

Press 7

ENTER to confirm your selection.

• If you selected “YES” in step 9, the setup

procedure is completed and the display returns to
the top set menu display. Press HMENU to exit
from “BASIC SETUP”.

• If you selected “NO” in step 9, the front speaker

level adjustment display appears in the front panel
display.

11

Press 7k / n to select a speaker and then
7l / h to adjust the balance.
The selected speaker and the front left speaker (or the
surround left speaker) output a test tone in turn.
• Press 7h to increase the value.
• Press 7l to decrease the value.

FR ----||----

• Select “FR” to adjust the balance between the front

left and right speakers.

• Select “C” to adjust the balance between the front

left and center speakers.

• Select “SL” to adjust the balance between the front

left and surround left speakers.

• Select “SR” to adjust the balance between the

surround left and surround right speakers.

• Select “SWFR” to adjust the balance between the

front left speaker and the subwoofer.

The available speaker channels differ depending on the
setting of the speakers.

12

Press H

MENU to exit from “BASIC SETUP”.

CHECK:TestTone

CHECK OK?

..YES

Note

01EN_RX-V363_U.book Page 23 Thursday, January 31, 2008 3:52 PM