Yamaha HTR-6130 - Manual (Page 26)

Basic setup
22
En
The “BASIC SETUP” feature is a useful way to set up your system quickly and with minimal effort.
• Make sure you disconnect your headphones from this unit.
• If you wish to configure this unit manually using more precise adjustments, use the detailed parameters in “SOUND MENU”
(see page 45).
• Altering any parameters in “BASIC SETUP” resets all parameters manually adjusted in “SOUND MENU” (see page 45).
• Initial settings are indicated in bold under each parameter.
• Press 8RETURN on the remote control to return to the previous menu level.
1
Press 4
AMP on the remote control.
2
Press H
MENU.
“BASIC SETUP” appears in the front panel display.
3
Press 7
ENTER to enter “BASIC SETUP”.
“ROOM” appears in the front panel display.
ROOM: S >M L
4
Press 7l / h to select the desired setting.
Select the size of the room where you have installed
your speakers. In general, the room sizes are defined
as follows:
Choices: S, M, L
[U.S.A. and Canada models]
S (small)
16 x 13 ft, 200 ft 2 (4.8 x 4.0 m, 20 m 2 )
M (medium) 20 x 16 ft, 300 ft 2 (6.3 x 5.0 m, 30 m 2 )
L (large) 26 x 19 ft, 450 ft 2 (7.9 x 5.8 m, 45 m 2 )
[Other models]
S (small)
3.6 x 2.8 m, 10 m 2
M (medium) 4.8 x 4.0 m, 20 m 2
L (large) 6.3 x 5.0 m, 30 m 2
5
Press 7n to select “SUBWOOFER” and then
7l / h to select the desired setting.
Choices: YES, NONE
• Select “YES” if you have a subwoofer in your
system.
• Select “NONE” if you do not have a subwoofer in
your system.
6
Press 7n to select “SPEAKERS” and then
7l / h to select the number of speakers
connected to this unit.
Basic setup
Notes
BASIC SETUP
.
Choice Display Speakers
2spk Front L/R
3spk Front L/R, Center
4spk Front L/R, Surround L/R
5spk Front L/R, Center, Surround L/R
SUBWOOFER
..YES
SPEAKERS
..5spk
L R
L C R
L R
SL SR
L C R
SL SR
01EN_RX-V363_U.book Page 22 Thursday, January 31, 2008 3:52 PM