Macintosh users – Yamaha CRW2100SX User Manual

Page 19

Setup Flowchart

Macintosh Users

STEP

1-1

STEP

1-2

STEP

YES

Set up the CRW2100SX drive

Check that the CRW2100SX
drive is recognized correctly

Purchase a SCSI card

Install the SCSI card

Recommended model:
Adaptec PowerDomain 2930U (PCI)

Read this manual and insert the
SCSI card into the appropriate
PCI slot on the computer.

Start using the CRW2100SX
drive!

Use the drive to create audio CDs, to
back up data on your hard disk, or for
whatever purpose suits your needs.

1. Set the switches at the rear of the drive.

(P.12, 13)

2. Connect the SCSI and power cables,

then switch the drive on. (P.18-20)

Use the Apple System Profiler and check
that the drive is recognized correctly.

Does your Macintosh have
a built-in SCSI connector?

For details about how to install the
software, refer to the documentation
that came with it.

Install the CD writing
software