Yamaha CRW2100SX - Manual (Page 12)

3
Before Use
System Requirements
In order to use the CRW2100SX drive, your computer system will need to meet
the following set of requirements.
n The CRW2100SX drive may not write at a maximum speed depending on your
computer’s system configuration.
PC/AT-Compatible Computer
CPU: Pentium II-class or higher, 300MHz or faster.
RAM: 32MB memory (64MB or more recommended).
n If you are using Windows 2000 operating system, you need 64MB or more memory.
A spare PCI expansion slot for a SCSI card (if one hasn’t been installed yet).
A SCSI card to connect SCSI devices (including the CRW2100SX drive) to your
computer. Make sure it has an internal bus connector. Yamaha recommends any
of Adaptec’s AHA-2940-series cards (PCI slot).
n For details about how to install the SCSI card, refer to the documentation that came
with it.
Operating System (OS)
Windows 95, Windows 98, Windows 98 Second Edition, Windows NT4.0 with
Service Pack 3 or later, Windows 2000.
CD Writing Software
The CRW2100SX drive requires CD writing software to write onto a CD-R/RW
disc. When you use the CD writing software, make sure that it supports the
CRW2100SX drive.
n For details about how to install and use the software, refer to the documentation that
came with it.