Xerox 412 - Manual (Page 12)

Page 12
Using ControlCentre 5.0....
When you install Xerox WorkCentre Pro 412 software, Xerox WorkCentre Pro 412
ControlCentre 5.0 utility is automatically installed. Use the following instructions to run
ControlCentre 5.0:
Click the [ Start] button on your desktop
computer.
1
From Programs , select [ Xerox WorkCentre
Pro 412] , then [ ControlCentre 5.0] .
The Xerox WorkCentre Pro 412
ControlCentre 5.0 screen appears.
2
To exit ControlCentre 5.0, click the [ Exit]
button in the bottom of each tab screen.
3
The ControlCentre 5.0 screen provides five tabs:
½ Settings: Used to configure Fax System Data settings.
½ Advanced: Used to change the default Fax System Setup options.
½ Phonebook: Used to create and edit phonebook entries.
½ Information: Used to view the software version information and various
counters.
½ Firmware: Used by authorized Xerox personnel to update the firmware of
your machine.
For further details, click the [ Help] button in the bottom of each tab screen.