Xerox 8265 - Manual (Page 6)

2
b. Leave the “Port number” set to 9100.
c. Click OK.
d. In the “Add Setup” dialog box, under “What do you want to call your new
setup?”, type the printer model number.
Figure 3. Add Setup Dialog Box (continued)
e. If you want others to be able to print to this RIP as a print server, under “Do you
want to print to your “model number” from other applications?”, click the
checkbox “Yes, install the desktop driver.”
f. Under “How is your “model number” connected to your computer?”, select
TCP/IP from the drop down box.
4. Click Finish. The Xerox WFC RIP is now setup to communicate with your Xerox Wide
Format Color Printer.
5. Complete the installation by verifying communications between the RIP and the printer
by sending a test print to the printer.
a. Right mouse click on the printer Setup > Test Print.
b. Verify that the printer outputs the test print.