4 click ok, 5 click compile in the compile mibs screen, 6 click yes when asked to confirm, then click ok – ZyXEL Communications ZyXEL Dimension ES-2024A User Manual
Page 6: 7 finally click done in the compile mibs screen, 6 finding your switch, 1 device auto-discovery, 2 add device(s) manually, 1 click insert, map object, device
NetAtlas Enterprise Ethernet Switch Manager
6
• zyxel-gs2024.mib
4 Click OK.
5 Click Compile in the Compile Mibs screen.
6 Click Yes when asked to confirm, then click OK.
7 Finally click Done in the Compile Mibs screen.
6 Finding your Switch
The SNMPc Network Manager can find new devices automatically using
auto-discovery (enabled by default) or you will have to add device(s)
manually.
6.1 Device Auto-Discovery
1 To enable auto-discovery and then
find your device, click Config,
Discovery/Polling.
2 Select the Enable Discovery check
box and click OK.
3 Find your device in the Device List
panel. Double-click the device icon to
access the EMS.
6.2 Add Device(s) Manually
If you have disabled auto-discovery,
follow the steps below to add your
device(s) manually.
1 Click Insert, MAP Object, Device.
2 In the MAP Object Properties
screen, enter a descriptive device
name and IP address for the device
and then click OK.
EMS_Switch_V1-01.fm Page 6 Friday, September 30, 2005 3:20 PM