beautypg.com

Zanussi ZBB26650SA User Manual

Page 9

background image

Problem

Possible cause

Solution

The door does not close tightly or it is

not shut properly

Check if the doors close well and the

gaskets are undamaged and clean

The door has been opened too fre-

quently

Do not leave the door open longer than

necessary

Food placed in the appliance was too

warm

Allow food to cool to room temperature

before storing

The temperature of the room that con-

tains the appliance is too high for effi-

cient operation

Try to reduce the temperature in the

room where the appliance stands

The lamp does not work.

The lamp is in stand-by.

Close and open the door.

The lamp is defective.

Refer to "Replacing the lamp".

It is too warm in the refrigerator

The Temperature Regulator may be set

incorrectly

Set a lower temperature

The door does not close tightly or it is

not shut properly

Check if the door closes well and the

gasket is undamaged and clean

Food placed in the appliance was too

warm

Allow food to cool to room temperature

before storing

Large quantities of food to be cooled

were put in at the same time

Insert smaller quantities of food to be

cooled at any one time

There is no inside cool air circulation

Provide inside cool air circulation

It is too cold in the refrigerator

The Temperature Regulator may be set

incorrectly

Set a higher temperature

It is too warm in the freezer

Temperature Regulator may be set in-

correctly

Set a lower temperature

The door does not close tightly or it is

not shut properly

Check if the door closes well and the

gasket is undamaged and clean

Large quantities of food to be frozen

were put in at the same time

Insert smaller quantities of food to be

frozen at any one time.

Food placed in the appliance was too

warm

Allow food to cool to room temperature

before storing.

Products to be frozen are placed too

closely to each other

Place the products in a way so that cold

air could circulate among them

It is too cold inside the freezer

Temperature Regulator may be set in-

correctly

Set a warmer temperature

The appliance does not work at

all. The appliance does not cool

at all. Neither cooling nor light-

ing works

The appliance may be switched off

Switch on the appliance

9

www.zanussi.com