Yazoo/Kees ZHDD61270 - Manual (Page 24)

22
OPERATION
7. Open the fuel switch for the selected fuel
tank.
8. Turn the ignition key to the run position to
activate the glow plug. Wait till the light
goes out, then turn key to start position.
9. When the engine starts, immediately
release the ignition key back to the run
position.
Open the fuel switch BAM-9
START
RUN
Start position
BAM-3
IMPORTANT INFORMATION
Wait till the glow plug light goes out or
damage could result to the engine.
IMPORTANT INFORMATION
To prolong starter life, use short starting
cycles, not to exceed 30 secs./min.
Extended cranking can damage starter
motor.