Yamaha AX16-AT - Manual (Page 8)

8
System Hookup Overview
AX16-AT—Owner’s Manual
System Hookup Overview
The following diagram shows how the AX16-AT connects to the DS2416 and
AX44s. Also shown are two digital multitrack recorders with ADAT format
inputs and outputs for up to 16 channels of digital audio transfer between
them and the DS2416.
When using an ADAT, set the corresponding ADAT/THRU switch (A or B) to
ADAT. To use an AX44, set the switch to THRU.
In the system shown here, the DS2416, ADAT-A, or ADAT-B could be used as
the wordclock master. (Supporting software is required to set the wordclock.)
If an ADAT recorder is used as the wordclock master, turn on the ADAT first,
set its wordclock, and then set the DS2416 wordclock.
A
A
A
[ THR
OUGH
IO-A
] THR
U-A
B
B
THR
U-B
B
[ THR
OUGH IO-B ]
[ THR
OUGH IO-B ]
B
B
B
[ THR
OUGH
IO-A
]
A
A
A
IO-A
IO-B
FULL HALF
OFF
I O A B SI SO
IO-A
IO-B
INPUT 1 2 3 4
1 2 3 4 OUTPUT
POWER
LINE MIC
–10dBV –50dBV –10dBV –50dBV
LINE MIC
AX44
INPUT 1 2 3 4
1 2 3 4 OUTPUT
POWER
LINE MIC
–10dBV –50dBV –10dBV –50dBV
LINE MIC
AX44
DS2416
AX16-AT
ADAT-A
IO-A
IN
OUT
IN
OUT
IO-A THRU-A
THRU-B
IO-B
IO-B
ADAT-B
AX44-A
ADAT-B
ADAT-A
AX44-B