Zanussi ZPB 1260 - Manual (Page 6)

6
To set the correct time of day :
1. press time function button and, while the symbol
is flashing, set the correct time of day by
pressing buttons “ “ or “ “ (Fig. 2).
The time arrow symbol will disappear about 5
seconds after the correct time is displayed.
2. if the symbol is not flashing anymore, press time
function button twice.
Then, proceed as described in point 1.
It is possible to set the time of day only when
the oven is off.
When the oven is first connected to the electrical
supply, the display will automatically show 12:00 and
the symbol
will flash.
Ensure the correct time of day is set before using the
oven.
Before the First Use of the Oven
Remove all packaging, both inside and outside
the oven, before using the oven.
The oven will work only if the time of day has
been set.
Before first use, the oven should be heated without
food.
During this time, an unpleasant odour may be
emitted. This is absolutely normal, and is
caused by residues of manufacturing.
1. set the time of day with the electronic programmer
(see paragraph "To set the correct time of day").
2. press button to switch on the oven.
3. press button twice and select the "Conventional
Cooking" function (Fig. 3).
4. set the temperature to 250°C using the increasing
push button “ “.
5. Allow the oven to run empty for approximately 45
minutes.
6. open a window for ventilation.
This procedure should be repeated with the "Full Grill"
function for approximately 5-10 minutes.
Once this operation is carried out, let the oven
cool down, then clean the oven cavity with a
soft cloth soaked in warm water to which a little
mild washing-up liquid has been added.
Before cooking for the first time, carefully wash
the oven accessories.
To open the oven door, always hold the
handle in the centre (Fig. 4).
Fig. 2
Fig. 3
Fig. 4
When the oven is first installed