SUUNTO X6HR User Manual

Page 13

1.5. BATTERY REPLACEmENT OF THE TRANSmITTER BELT

the transmitter belt operates on a 3-volt lithium cell, type: Cr 03.
the transmitter belt’s average expected battery life is 300 hours of use in ideal operating

temperatures.
When Suunto X6

is not receiving a signal but the transmitter belt is active, a change

of battery might be necessary. refer to chapter .4.. for other factors that may interfere

with the correct signal.
to change the battery:

. Insert a coin into the slot located on the battery compartment cover on the backside

of the transmitter belt.

. turn the coin counterclockwise until it is aligned with the open position marker, or

even slightly further for easy opening.

3. remove the battery compartment cover. ensure that the O-ring and all surfaces are

clean and dry. Do not stretch the O-ring.

4. Carefully remove the old battery.

5. Place the new battery into the battery compartment with the positive side facing

up.

This manual is related to the following products:

X6HRM