Rear panel, Installation 7, Set to master – Yamaha CRW8424E User Manual
Page 23: R g l csel slave master, Jumper switches plastic shunt
Installation
7
Set the CRW8424E as master.
Plug the included plastic shunt to the MASTER jumper switch on
the rear panel of the CRW8424E.
R G L
CSEL
SLAVE
MASTER
Set to MASTER.
IDE
INTERF
ACE
CONNECT
OR
DC IN
PUT
1
+5V
G
+12V
CSEL
SLA
VE
MASTER
AUDIO OUT
R
L
G
Jumper switches
Plastic shunt
Rear Panel
The plastic shunts actually contain metal for bridging the two pins of a
jumper switch, creating an electrical connection between them when
attached. When removed, the jumper switch is set to “OFF.” Store
unused plastic shunts in a safe place where they will not be lost.
Use a pair of long-nosed pliers to attach or detach the
plastic shunts accordingly. However, make sure that the
computer is switched off when doing so.
14