Tools, Phillips screwdriver, Long-nosed pliers – Yamaha CRW8424E User Manual

Page 14

Text mode
Original mode

System Configuration

Tools

You will need the following tools at hand when installing the CRW8424E drive.

Phillips Screwdriver

You will need to use this when removing the cover of your computer and when
mounting the drive. You may also need to temporarily remove the sound card to
gain access to the CD audio connectors. In which case a small screw retaining the
sound card’s face plate has to be removed.

Make sure your screwdriver’s head is the correct size for the screws you need to
remove.

Long-Nosed Pliers

You will need these to insert or remove the plastic shunts when setting the jumper
switches at the back of the CRW8424E drive.